Connect Power for the Fabric Interconnect F1-4
Note -
If you have a ruler or tape measure, check the power cord's protrusion from the face
of the Fabric Interconnect F1-4. Power cords cannot protrude more than 2 5/16” (60 mm) as
documented in
“Power Cord Management” on page 46
.
FIGURE 58
Fabric Interconnect F1-4 Power Cord Anchored
5.
When the power cord is in place and complies with the considerations in
, clip the tie wrap so that it has no more than
1” (2.54 cm) of excess length.
6.
for the other power supply. When both power
cords installed correctly, proceed to
.
7.
Connect the dual power supplies to a facility AC power source. The Fabric
Interconnect F1-4's power supplies do not have a power switch, so the Fabric
Interconnect F1-4 will power up when the power cord is connected to facility
power.
92
Oracle Fabric Interconnect Hardware User's Guide • July 2016
Summary of Contents for Fabric Interconnect F1-15
