Oracle Fabric Interconnect F1-15, User Manual

Page: 52 / 176

Install the Fabric Interconnect F1-4
Note -
If you marked the rack posts as documented in Step 3 , you should know where the right
angle brackets need to be attached to the rack. Before attaching the brackets, make sure that the
marks you made on the front and rear rack posts are level.
FIGURE 25 Attaching Right Angle Brackets to the Equipment Rack
11. Orient the Fabric Interconnect so that the rack-depth measures are pointing
towards the opposite end of the equipment rack shown in Figure 25, “Attaching
Right Angle Brackets to the Equipment Rack,” on page 52 .
12. While supporting the Fabric Interconnect, hold it level and slide it into the rack
(1). See Figure 26, “Attaching the Rack Depth Measures to the Angle Brackets,”
on page 53 . You can use the marks you made in Step 3 to make sure you are
sliding the Fabric Interconnect F1-4 into the correct location.
13. Choose either of the following workflows based on the whether you have a
standard 4-post rack or a 27” Sun/Oracle rack:
■
“Attach the Right Angle Bracket” on page 31
52 Oracle Fabric Interconnect Hardware User's Guide • July 2016