Oracle Fabric Interconnect F1-15, User Manual

Page: 98 / 176

Change the Root Password
Please input the 'recovery-password': **** (unlimited length)
Please confirm the 'recovery-password': ****
IP Address [static/DHCP]: DHCP
Management IP Address [X.X.X.X]: (appears only if static addressing is selected)
Subnet Mask [X.X.X.X]: (appears only if static IP addressing is selected)
Default Gateway [X.X.X.X]: (appears only if static IP addressing is selected)
Enter DNS Server 1: (appears only if static IP addressing is selected)
Enter DNS Server 2: (appears only if static IP addressing is selected)
Enter DNS Server 3:
Enter NTP Server 1: hostname, IP address, or blank
Enter NTP Server 2: hostname, IP address, or blank
Enter NTP Server 3:
Supply the SNMP Read Community Name (leave blank if you want to keep the default of 'public')
When you have completed the configuration, the Oracle Configuration Wizard closes and
returns you to the admin@<system_name> prompt.
Change the Root Password
When you have completed the Oracle Configuration Wizard, log in to the Fabric Interconnect,
and change the root password:
1. Log in to the Fabric Interconnect as root by entering:
login as: root
Password: root
2.
Change the root password:
# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
#
3. Log out of the Oracle Fabric Interconnect.
# logout
There is no further need for the direct serial port connection. You can continue with the system
configuration using the direct connection if you wish. Or, you can close the connection and
complete the system configuration remotely, over a network using SSH.
98 Oracle Fabric Interconnect Hardware User's Guide • July 2016