Optical Systems Design OSD2700SFP SERIES, Operator'S Manual

Page: 90 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 90
6.14 LLDP
LLDP GENERAL SETTINGS
1.
LLDP: Click “LLDP” drop-down menu from “LLDP” drop-down list to choose “Enable” or
“Disable” to enable or disable Link Layer Discovery Protocol (LLDP) globally.
2. Holdtime multiplier(2-10): Click in the “Holdtime multiplier” textbox and set the Link Layer
Discovery Protocol (LLDP) holdtime multiplier value. The transmit interval is multiplied by the
holdtime multiplier to give the Time To Live (TTL) that the switch advertises to the neighbors.
Enter a Holdtime multiplier value in the range from 2 to 10. Default is 4.
3. Tx Interval (5-32768 seconds): Click in the “Tx Interval” textbox and set the transmit interval.
This is the interval between regular transmissions of Link Layer Discovery Protocol (LLDP)
advertisements. Enter a Tx Interval value in the range from 5 to 32768. Default is 30 seconds.
4. Global TLV setting: Click and choose Link Layer Discovery Protocol (LLDP) Type Length Value
(TLV) setting.
5. Update Setting: Click “Update Setting” button when you finished LLDP General Settings.