Optical Systems Design OSD2700SFP SERIES, Operator'S Manual

Page: 185 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 185
7.11 SNMP
SNMP General Setting, SNMP v1/v2c, SNMP v3
SNMP GENERAL SETTING
SNMP Status:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use snmp-server enable command to enable and no snmp-server enable command to disable SNMP
to the switch.
3.
Command Syntax:
(no) snmp-server enable
4.
Example:
The following example enables SNMP to the switch:
switch_a(config)#snmp-server enable
switch_a(config)#
Description:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use
snmp-server description
command to specify and
no snmp-server description
command to
remove description for SNMP.
3.
Command Syntax:
snmp-server description DESCRIPTION
no snmp-server description
DESCRIPTION The description for SNMP.
4.
Example:
The following example specifies description ( description ) for SNMP:
switch_a(config)#snmp-server description description
switch_a(config)#
Location:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#