Optical Systems Design OSD2700SFP SERIES, Operator'S Manual

Page: 200 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 200
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use this command to enable Link Layer Discovery Protocol (LLDP) notification on the interface.
Use the no parameter with this command to disable Link Layer Discovery Protocol (LLDP) notification
on the interface.
3.
Command Syntax:
(no) lldp notification
4.
Example:
The following example enables Link Layer Discovery Protocol (LLDP) notification on the interface
fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#lldp notification
switch_a(config-if)#
TLVs:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use this command to configure Link Layer Discovery Protocol (LLDP) Type Length Value (TLV)
setting on the interface.
Use the no parameter with this command to disable Link Layer Discovery Protocol (LLDP) Type
Length Value (TLV) setting on the interface.
3.
Command Syntax:
(no) lldp tlv-global port-descr
｜
sys-name
｜
sys-descr
｜
sys-cap
｜
mgmt-addrs
｜
port-vlan-id
｜
mac-
phy
｜
protocol-identity
｜
vlan-name
｜
port-and-protocol
｜
power-mdi
｜
link-aggregation
｜
max-frame
port-descr Port Description TLV.
sys-name System Name TLV.
sys-descr System Description TLV.
sys-cap System Capabilities TLV.
mgmt-addrs Management Address TLV.
port-vlan-id Port VLAN ID TLV.
mac-phy MAC/PHY Configuration/Status TLV.
protocol-identity Protocol Identity TLV.
vlan-name VLAN Name TLV.
port-and-protocol Port And Protocol VLAN ID TLV.
power-mdi Power Via MDI TLV.
link-aggregation Link Aggregation TLV.
max-frame Maximum Frame Size TLV.