Optical Systems Design OSD2700SFP SERIES, Operator'S Manual

Page: 12 / 223

OPTICAL SYSTEMS DESIGN
DOC ID: 10112704
OSD2700SFP OPERATOR MANUAL
PAGE 12
2.4 OSD2700 FRONT AND REAR PANELS
There are 24 fixed 100M SFP ports, four fixed Gigabit copper ports and four optional Gigabit SFP
ports which can be either copper or fiber on the front panel. The rear panel consists of a DB9
configuration connector and an IEC power. Each section will be described further throughout this
manual.
*Note: The 4 SFP ports and 4 fixed Copper ports are Gigabit combo ports. It is possible to use either
the RJ45 port or the SFP port per channel (G1, G2, G3, G4). ie It is not possible to use both at the same
time.
FIGURE 7: OSD2700SFP FRONT AND REAR PANELS
2.4.1
OSD2700SFP DIMENSIONS
The OSD2700SFP is designed to be mounted onto a 19” rack unit occupying 1RU space or can be free
standing on an even surface.
24 x 10/100Base
SFP Ports
4 x Copper
Combo Port*
4 x SFP Combo
Port*
DB9
Configuration
Connector
IEC Power Connector
+ Fuse and Switch
442
44