OPEN 812L VoIP ATA Router
User Guide
Page 9
OPEN Networks Pty Ltd
www.opennw.com
2.3.2 Rear
Panel
Indicators
Figure 2-2 displays the real panel indicators of the VoIP ATA.
Figure 1-2: Rear Panel Indicators
PORT
Item
PORT LABEL DESCRIPTION
1
12V DC
Connect your power adapter to the
12V DC.
Use only the power
adapter provided.
2 WAN
The
WAN
port allows you to connect the VoIP ATA to you router
using Category-5 (or better) Ethernet network cable (RJ-45).
Connect your modem or router to the WAN port.
3 LAN
The
LAN
port allows you to connect the VoIP ATA to your computer
using a Category-5 (or better) Ethernet network cable (RJ-45).
Connect the Ethernet cable to the LAN port on one end and
connect the other to your computer or an office/home network.
4
RESET
The
RESET
button allows you to restore the VoIP ATA’s default
factory settings. To reset the router, press and hold the button for 3
seconds. The OPEN 812L VoIP ATA router should reboot after you
release the button.
5
LINE
This is the Lifeline. If your broadband connection is ‘off line’, you
can make calls using your traditional line as a backup. The Lifeline
port allows you to connect your normal PSTN line to the VoIP ATA.
To activate this function, connect a phone cable from your wall
phone jack to the Lifeline port.
6
PHONE 1
Connect an analogue phone to this port.
7
PHONE 2
Connect an additional analogue phone to this port, if used.
All customized settings that you have saved will be lost upon resetting the VoIP ATA to default
factory settings.
1
2
3
4
5
6
7
