OPEN 812L VoIP ATA Router
User Guide
Page 22
OPEN Networks Pty Ltd
www.opennw.com
4.5
Factory Default Settings
Before configuring your router, you need to know the following default settings.
4.5.1
Web Interface (Username and Password)
Username:
root
Password:
0P3N
(the first character '0' denote a zero)
The default username and password are '
root
' and '
0P3N
' respectively. These fields are case-
sensitive.
If you ever forget your login password, you may press the RESET button for up to 3 seconds to
restore the factory default settings.
4.5.2
LAN Device IP Settings
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
4.5.3 DHCP
server
DHCP server is enabled.
Start IP Address: 192.168.10.100 – End IP Address: 192.168.10.199
IP pool counts: 100 to 199.
4.5.4
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.10.1
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing from
192.168.10.100 through
192.168.10.199
The WAN port is the DHCP
Client.
