OPEN 812L VoIP ATA Router
User Guide
Page 14
OPEN Networks Pty Ltd
www.opennw.com
3.4
Multiple-Users Connection Via ADSL
If you want to connect more than one PC/notebook, you may do so by connecting the OPEN
812L VoIP ATA router to a switch/hub.
To do this, follow the steps provided below.
Step 1:
Connect the power adapter provided into the OPEN 812L VoIP ATA router and plug
the unit into a power source. Make sure the PWR LED is steadily lit.
Step 2:
Connect your ADSL modem to the WAN port of the OPEN 812L VoIP ATA router
using the Ethernet cable provided. The WAN LED should be steadily lit.
Step 3:
Connect an Ethernet cable into the LAN port of the OPEN 812L VoIP ATA router.
Connect the other end of the cable to the hub/switch. The LAN LED should be
steadily lit.
Step 4:
Connect your computers/notebooks to the hub/switch using the Ethernet cables.
Step 5:
Connect a phone cable to the LINE (Lifeline) port if using as a backup.
Step 6:
Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone cable
(RJ-11).
Figure 3-4: Multiple Users Connection Via ADSL
