OPEN 812L VoIP ATA Router
User Guide
Page 12
OPEN Networks Pty Ltd
www.opennw.com
3.2
Single-User Cable Connection
Step 1:
Connect the power adapter provided into the OPEN 812L VoIP ATA router and plug
the unit into a power source. Make sure the PWR LED is steadily lit.
Step 2:
Connect your cable modem to the WAN port at the back of the OPEN 812L VoIP
ATA router using the Ethernet cable provided.
Step 3:
Connect an Ethernet cable into the LAN port of the OPEN 812L VoIP ATA router.
Connect the other end of the cable to your computer. The LAN LED should be
steadily lit.
Step 4:
Connect a phone cable to the LINE (Lifeline) port if using as a backup.
Step 5:
Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone
cable(s).
The following shows a typical single-user cable connection.
Figure 3-2: Single-User Connection via Cable
Before you connect to the ATA, you need to have a Cable modem.
