OPEN 812L VoIP ATA Router
User Guide
Page 11
OPEN Networks Pty Ltd
www.opennw.com
3.1
Single-User Connection Via ADSL
Step 1:
Connect the power adaptor provided into the OPEN 812L VoIP ATA router and plug
the unit into a power source. Make sure the PWR LED is steadily lit.
Step 2:
Connect your ADSL modem to the WAN port at the back of the OPEN 812L VoIP
ATA router using the Ethernet cable provided. The WAN LED should be steadily lit.
Step 3
:
Connect an Ethernet cable into the LAN port of the OPEN 812L VoIP ATA router.
Connect the other end of the cable to your computer. The LAN LED should be
steadily lit.
Step 4:
Connect a phone cable into the LINE (Lifeline) port, if using as a backup. Connect
the other end of the cable to the line splitter or wall phone jack.
Step 5:
Connect your analogue phone(s) to the phone Port 1 and/or 2 using a phone
cable(s).
The following diagram shows a typical single-user connection.
Figure 3-1: Connection via ADSL
Before you connect to the OPEN 812L VoIP ATA router, you need to have an ADSL modem.
