Omron V780-HMD68-EIP-JP, User Manual

Page: 287 / 326

9 - 5
9 Troubleshooting
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
9-2 Error T
ables
9
9-2-
1 Comman
d Error
s
RF Tag Communications Errors
Error name Error code Description
RF Tag missing error 2001 hex There is no RF Tag in the communications range.
RF Tag communications
failed
2002 hex
Communications with the RF Tag did not end normally.
RF Tag address error
2004 hex
The access address for the RF Tag is outside of the area sup-
ported by the target RF Tag.
RF Tag lock error 2005 hex Access to an area that is locked in the RF Tag failed.
RF Tag verification error
2006 hex
Verification was performed for the results of writing data to the RF
Tag, but inconsistencies were discovered.
RF Tag system error 2008 hex The RF Tag returned an error response.
Password error
2009 hex
The access password does not match the RF Tag.
*1
*1. When the environment is unstable, this error can occur even if the access password is correct.
Communications error
between Reader/Writers
200B hex
The master Reader/Writer will establish communications with the
slave Reader/Writers during execution of the Multi-Reader/Writer
function.
Communications canceled
2011 hex
Processing was canceled when a STOP command was received
before an RF Tag was detected. (The contents of the RF Tag was
not changed, even for a DATA WRITE command.)
Communications aborted
2012 hex
Processing was aborted when a STOP command was received
during communications with an RF Tag.