Omron V780-HMD68-EIP-JP, User Manual

Page: 192 / 326

7 Ethernet/IP Communications
7 - 40 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
z Function
This command sets the transmission powers of the Reader/Writer.
z Command Area
SET TRANSMISSION POWER
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 3003 hex
CmdParam1/Command Parameter 1 WORD 2 bytes Number of words in transmission power set-
tings
0002 to 0010 hex
* Number of Readers/Writers x 2 words
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
Master
Reader/Writer Transmis-
sion power
(Read) WORD 2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
Transmis-
sion power
(Write) WORD 2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
Slave
Reader/Writer
1 Transmis-
sion power
(Read) WORD 2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
Transmis-
sion power
(Write) WORD 2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
... ... ... ...
Slave
Reader/Writer
7 Transmis-
sion power
(Read) WORD 2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
Transmis-
sion power
(Write) WORD 2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex