Omron V780-HMD68-EIP-JP, User Manual

Page: 196 / 326

7 Ethernet/IP Communications
7 - 44 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
z Function
This command sets the channels for the Reader/Writer.
z Command Area
z Response Area
SET CHANNEL
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 3005 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
Channel WORD 2 bytes
Specifies the channel.
*1
[For JP]
0000 hex: Auto
0005 hex: 5 CH
000B hex: 11 CH
0011 hex: 17 CH
*1. You can set the channels to use only in the models for JP. You cannot set the channels for any other model.
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.