Omron V780-HMD68-EIP-JP, User Manual

Page: 209 / 326

7 - 57
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-
2 V780 Co
mm
and
Detail
s
7
7-2
-6 Rea
der/W
riter Setting Comman
ds: C
ommunications Setting
s
z Function
This command sets the smoothing buffer size of the Reader/Writer.
z Command Area
z Response Area
SET SMOOTHING BUFFER
Signal/name Data type Size Function
CmdCode/Command Code WORD 2 bytes 3011 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
Smoothing Buffer Size WORD 2 bytes Specifies the smoothing buffer size.
0000 to 0400 hex (0 to 1024 [conditions])
* 0 implies that smoothing is disabled
Default setting: 0400 hex
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.