Omron V780-HMD68-EIP-JP, User Manual

Page: 187 / 326

7 - 35
7 Ethernet/IP Communications
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
7-
2 V780 Co
mm
and
Detail
s
7
7-2
-5 Rea
der/W
riter Setting Comman
ds: D
evice Setting
s
z Function
This command is used to check the Multi-Reader/Writer configuration set in the Multi-Reader/Writer.
z Command Area
z Response Area
GET MUTLI-READER/WRITER CONFIGURATION
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 5004 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
Signal/data Data type Size Function
ErrCode/Error Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
RespData/Response Data
Multi-Reader/Writer Mode WORD 2 bytes Expresses whether the multi-Reader/Writer
Mode is enabled or disabled.
0000 hex: Disable
0001 hex: Enable
Default setting: 0000 hex
Number of Slave Reader/Writ-
ers WORD 2 bytes Expresses the number of Slave Readers/Writers.
0000 to 0007 hex
Default setting: 0000 hex
Slave Reader/Writer 1 DWORD 4 bytes Expresses the IP address of Slave
Reader/Writer 1.
Example) C0A801C9 (192.168.1.201)
Default setting: 00000000 hex
Slave Reader/Writer 2 DWORD 4 bytes Expresses the IP address of Slave
Reader/Writer 2.
Example) C0A801CA (192.168.1.202)
Default setting: 00000000 hex
... ... ... ...
Slave Reader/Writer 6 DWORD 4 bytes Expresses the IP address of Slave
Reader/Writer 6.
Example) C0A801CE (192.168.1.206)
Default setting: 00000000 hex
Slave Reader/Writer 7 DWORD 4 bytes Expresses the IP address of Slave
Reader/Writer 7.
Example) C0A801CF (192.168.1.207)
Default setting: 00000000 hex