Omron V780-HMD68-EIP-JP, User Manual

Page: 253 / 326

8 - 17
8 Browser Interface
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
8-2
Op
eratio
n In
terface
8
8-2
-7 Utilities
Click the Utility Button, and then click the RF Tag access Tab.
A tab page to use RF communications commands to access RF Tags will be displayed. You can use
this tab page to check operation for reading and writing the RF Tag UIIs (EPC codes) or data at any RF
Tag addresses.
Precautions for Correct Use
This tab page cannot be used if the Reader/Writer is started in Safe Mode or SLAVE Mode. Use
this tab page when the Reader/Writer is operating in Run Mode.
8-2-7 Utilities
RF Tag Access
Item name Description
RF communications com-
mand Select the command to send.
Setting range: ID read (ID READ), ID write (ID WRITE), Data read (DATA READ),
or Data write (DATA WRITE)
Data address Enter the first RF Tag address to read or write in four hexadecimal digits.
Setting range: 0000 to 3FFF hex
Data size If you specify reading data, enter the data size to read in four hexadecimal digits. If
you specify writing data, the
Write data box will display the count of the data size
in four hexadecimal digits.
Setting range: 0001 to 0078 hex
Write data Enter hexadecimal words for the data to write to the RF Tag.
Setting range: 120 words max.
Command The command to send will be displayed.
Repeat Select this check box to repeatedly send the command.
Response The response from the Reader/Writer will be displayed.
Click this button to delete the information
displayed in the Command/Response Log Area.
Click this button to send the command
that is displayed in the
Command Box.
If you click this button while a
command is being repeatedly sent,
repeatedly sending the command will
be stopped.