Omron V780-HMD68-EIP-JP, User Manual

Page: 277 / 326

8 - 41
8 Browser Interface
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
8-2
Op
eratio
n In
terface
8
8-2
-1
1 C
onfigu
ration File
This section describes the format of the configuration file. The configuration file uses a normal INI file
format.
• Any line that starts with a semicolon (;) is treated as a comment.
• Any line that starts with an opening bracket ([) is treated as a section declaration row. The row must
also end in a closing bracket (]).
• Any row that does not start with either of the above two characters is an entry row.
8-2-11 Configuration File
Section and Entry Table
Section name Entry name Description Default
NetworkSetting IPAddressSetting
Method Gives the IP address setting method for the
Reader/Writer.
Specify a decimal value.
0000: Fixed setting
0001: Obtain from BOOTP server
0002: Get from BOOTP server as fixed set-
tings 0000
IPAddress Gives the setting of the IP address of the
Reader/Writer. It is given as four decimal
numbers separated by periods. 192.168.1.200
SubnetMask Gives the setting of the subnet mask of the
Reader/Writer. It is given as four decimal
numbers separated by periods. 255.255.255.0
GatewayAddress Gives the setting of the default gateway of
the Reader/Writer. It is given as four decimal
numbers separated by periods. 192.168.1.254
DeviceName Gives the name of the Reader/Writer. It is
given in up to 63 ASCII characters. (Not set.)
WebPort Gives the Ethernet communications port
number for the browser interface. It is set to
1024 to 65535 decimal. 7090
WebPassword Gives the login password for the browser
interface. It is specified in up to 15 ASCII
characters. “” (blank) is specified for no pass-
word. (Not set.)
RFCommunication-
Setting RFCommunication
Mode Gives the RF communications mode setting.
It is specified as a decimal value.
0: Once
1: Auto
2: Focus
3: Repeat 0
RFCommunication
Speed Gives the communications speed between
the Reader/Writer and RF Tags. It is speci-
fied as a decimal value.
0: Auto speed
1: High speed
2: Normal speed 0
RFCommunication
Timeout Gives the RF communications timeout time.
It is specified as a decimal value. 250