Omron V780-HMD68-EIP-JP, User Manual

Page: 182 / 326

7 Ethernet/IP Communications
7 - 30 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IP
TM
) (Z402)
z Function
This command sets the TCP/IP communications conditions of the Reader/Writer.
z Command Area
z Response Area
7-2-4 Setting and Getting Reader/Writer Information Settings
SET TCP/IP COMMUNICATIONS CONDITIONS
Signal/data Data type Size Function
CmdCode/Command Code WORD 2 bytes 2001 hex
CmdParam1/Command Parameter 1 WORD 2 bytes 0000 hex (Not used.)
CmdParam2/Command Parameter 2 WORD 2 bytes 0000 hex (Not used.)
Reserved/Reserved Area WORD 2 bytes 0000 hex (Not used.)
Cnt Response/Update Counter
Response WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.
CmdData/Command Data
IP address setting method WORD 2 bytes IP address setting method to be set
0000 hex: Fixed setting
0001 hex: Obtain from BOOTP server
0002 hex: Obtain from BOOTP server as
fixed settings
Default setting: 0000 hex
IP address
*1
*1. Specify 00000000 hex for any IP address setting method other than using a fixed IP address.
DWORD 8 bytes Fixed IP address to be set
00000000 to DFFFFFFF hex
Default setting: C0A801C8 hex
Subnet mask
*1
DWORD 8 bytes Subnet mask to be set
FF000000 hex to FFFFFFFF hex
Default setting: FFFFFF00 hex
Gateway address
*1 DWORD 8 bytes Gateway address to be set
00000000 to DFFFFFFF hex
Default setting: CAA801FE hex
Signal/data Data type Size Function
ErrCode/Command Code WORD 2 bytes Error code
RespInfo1/Response Information 1 WORD 2 bytes 0000 hex (Not used.)
RespInfo2/Response Information 2 WORD 2 bytes 0000 hex (Not used.)
RespInfo3/Response Information 3 WORD 2 bytes 0000 hex (Not used.)
Cnt/Update Counter WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to
Update Counter/Update
Counter Response on page 7-10.