![background image](http://html1.mh-extra.com/html/omron/v500-r2-series/v500-r2-series_user-manual_741439081.webp)
79
V500-R2 series
User’s Manual
Se
ct
io
n
4
Me
nu Shee
t/Co
mmand List
Section 4
Setting Method
Setting for label registration
You should first register codes in the reader so that they are recognized as OK. This
function outputs the OK signal when the reader reads a code that matches one of the
registered codes and outputs the NG signal for a code that does not match any of those
codes.
Up to 5 codes can be registered.
E.g.: The following describes the steps for registering labels.
To cancel a label registration, end the setting without reading a label in label
registration processing.
Up to 123 bytes of a single set of data, and up to 250 bytes of data in total can be registered.
Menu sheet
Command
Register labels
_+9_
+9
Setting start (ZZ)
Label registration (+9)
Read the first code you want to register
Read the second code you want to register
Read the fifth code you want to register
Setting end (ZZ)
Summary of Contents for V500-R2 Series
Page 1: ...Z334 E1 01A Cat No Fixed Laser Type Barcode Reader User s Manual V500 R2 Series...
Page 18: ...16 V500 R2 series User s Manual Introduction Contents Introduction MEMO...
Page 36: ...34 Section 2 Installation V500 R2 series User s Manual Section 2 Wiring and Installation MEMO...
Page 143: ......