33
V500-R2 series
User’s Manual
Section
2
In
st
alla
tion
Section 2
Wiring and Installation
Installation
To avoid regular reflection of laser, incline approx. 15° against the bar code subject to read
when installing the bar code reader. Use this mounting bracket as the mounting surface of an
associated mounting bracket is inclined 15°.
1.
Attach the insulating plate and mounting bracket to the barcode reader. (M3 screws,
Tightening torque 0.54 N•m)
2.
Install. (M5 screws, Tightening torque 2.3 N•m)
• Do not apply stress on the cable when installing or using.
• Distance and angle allowed to read differs according the bar code. Check if the used bar code can
be read actually, before installing.
8
°
to 60
°
10
°
to 60
°
0
°
8
°
10
°
0
°
V500-R2 series
V500-R2 series
M3
×
6
M3
×
8
15°
15°
When you attach this line of the bracket
vertically, the bar code reader inclines 15°.
When you attach this line
of the bracket horizontally,
the bar code reader
inclines 15°.
Horizontal
Vertical
Summary of Contents for V500-R2 Series
Page 1: ...Z334 E1 01A Cat No Fixed Laser Type Barcode Reader User s Manual V500 R2 Series...
Page 18: ...16 V500 R2 series User s Manual Introduction Contents Introduction MEMO...
Page 36: ...34 Section 2 Installation V500 R2 series User s Manual Section 2 Wiring and Installation MEMO...
Page 143: ......
