Omron V500-R2 Series, User Manual

Page: 63 / 144

61
V500-R2 series
User’s Manual
Se
ct
io
n
4
Me
nu Shee
t/Co
mmand List
Section 4
Setting Method
Hatching parts are the changed point from the factory default setting.
Collective setting
Menu sheet Command
Setting for connecting link unit (V700-L12)
_EDA_
[EDA
Item Setting content
Types of code, which is possible to
read EAN/UPC, CODE39, Codabar (NW-7), Industrial2of5(STF), ITF
Number of reading digits No designated number of digits
Detail
condition CODE39 detail setting Invalid C/Dof CODE39
Transfer C/D of CODE39
Transfer ST/SP of CODE39
Codabar (NW-7) detail
setting Invalid C/D of Codabar (NW-7)
Transfer C/D of Codabar (NW-7)
Transfer ST/SP of Codabar (NW-7) (abcd/abcd)
ITF/
Industrial2of5(STF)
detail setting Invalid C/D of ITF/Industrial2of5(STF)
Transfer C/D of ITF/Industrial2of5(STF)
Reading
condition Reading system Trigger reading
Reading operation Single reading
Reading valid time T 2 sec.
Number of reading
coincidence Twice (Verification: once)
Communication
condition Communication speed 9600 bps
Data length
8-bit
Parity Even number
Stop bit length 1-bit
Header None
Footer CR
Transfer number of
digits Not transferred
RS/CS control None
CS waiting time Infinity
Communication
protocol No protocol system
Process when reading
is NG Transfer ? (CR), > (CR)
LED illumination LED illumination time after decoding is 200 ms.
Buzzer sound Buzzer sound duration after decoding is 200 ms.
Buzzer sound volume Max.
Buzzer frequency 3 kHz, 2 kHz
External trigger signal Negative logic (L active)
READ OK/NG signal output Output
READ OK/NG signal output system Trigger synchronous system, positive logic (H active)