84
Se
ct
io
n
4
Me
nu Shee
t/Co
mmand List
V500-R2 series
User’s Manual
Section 4
Setting Method
Number of digit output
Whether to output the number of digits to the data output format is specified.
This setting item can be registered as 1 item of the header and is added to a location
determined by the order of registration.
Set “Clear the header (PR)” to clear the number of digit output.
E.g.: The following describes the steps for setting the number of digit output.
Menu sheet
Command
Number of digit output
(Bar code: 2 digits)
_$3_
$3
Number of digit output
(Bar code: 6 digits)
_$6_
$6
The output format is as shown below.
• When the the number of digits output is set to [ZZRY$3ZZ] (barcode 2 digits), the number of digits is
"05" when the data of the barcode of the scanned code is "ABCDE".
• When the number of digits output is set to [ZZRY$6ZZ] (barcode 6 digits), the number of digits is
"000005" when the data of the barcode of the scanned code is "ABCDE".
Setting start (ZZ)
Set the headers collectively (RY)
Output the number of digits ($3)
Setting end (ZZ)
Summary of Contents for V500-R2 Series
Page 1: ...Z334 E1 01A Cat No Fixed Laser Type Barcode Reader User s Manual V500 R2 Series...
Page 18: ...16 V500 R2 series User s Manual Introduction Contents Introduction MEMO...
Page 36: ...34 Section 2 Installation V500 R2 series User s Manual Section 2 Wiring and Installation MEMO...
Page 143: ......