![background image](http://html1.mh-extra.com/html/omron/v500-r2-series/v500-r2-series_user-manual_741439059.webp)
57
V500-R2 series
User’s Manual
Se
ct
io
n
4
Me
nu Shee
t/Co
mmand List
Section 4
Setting Method
Start/end setting using menu sheets
When setting the reader using menu sheets, read this menu sheet at the start and end
of the procedure.
Write setting contents on the nonvolatile memory
Be sure to write the settings in the nonvolatile memory whenever a condition is set by
inputting a command from the upper equipment. When you turn the power OFF without
writing the setting in the memory, the settings will be lost.
Setting for external trigger signal
Select positive logic or negative logic of the external trigger signal.
Menu sheet
Command
Start/end setting using menu sheets
_ZZ_
None
Menu sheet
Command
Write the contents set with a command in the nonvolatile
memory.
(No menu sheet)
Z2
Menu sheet
Command
External trigger signal, positive logic (H active)
_YA_
YA
External trigger signal, negative logic (L active) (factory
default setting)
_YB_
YB
Summary of Contents for V500-R2 Series
Page 1: ...Z334 E1 01A Cat No Fixed Laser Type Barcode Reader User s Manual V500 R2 Series...
Page 18: ...16 V500 R2 series User s Manual Introduction Contents Introduction MEMO...
Page 36: ...34 Section 2 Installation V500 R2 series User s Manual Section 2 Wiring and Installation MEMO...
Page 143: ......