![background image](http://html1.mh-extra.com/html/omron/smart-sensor-zfx-c/smart-sensor-zfx-c_user-manual_1633245090.webp)
Setting Measurement Items
ZFX-C User’s Manual
3
SETTING THE MEAS
UREM
ENT CONDITIONS
87
Bright/Color Inspection
Bright
Use this item to measure the brightness of measurement targets. The density average and density deviation
(brightness fluctuations) are output. Change in brightness can be used to inspect whether or not parts are
present.
Region settings
This function sets the measurement region.
X
MENU mode - [Setup] - [Item] - [Region]
Threshold
This function sets the judgment conditions.
X
MENU mode - [Setup] - [Item] - [Limits]
Setup Item
Description
Measurement region
This function sets the region to be measured.
Setting the Region p.213
Reference registration
When the measurement region is set, measurement is executed on the display image,
and the result of execution is registered as the reference value. To re-register only refer-
ence values, you can use this function to re-register only reference values based on the
image currently on screen.
Setup Item
Description
Density average
Sets the range of the density average to be judged as OK.
Range: 0 to 255.0
Density deviation
Sets the range of the density deviation to be judged as OK.
Range: 0 to 127.0
Setup
Measurement
Measurement region
Density average,
density deviation
Summary of Contents for Smart Sensor ZFX-C
