Omron NT31 Series, Operation Manuals

Page: 215 / 707

204
Various System Settings
Section 6-9
Press [ ] (next screen) or [ ] (previous
screen) to display the second memory switch
setting screen.
Press “Resume Function” to display the re-
quired setting.
The setting option changes each time the
touch switch is pressed.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
S
To confirm the settings and quit the memory switch setting screen, press the
“Quit” touch switch. The settings made last will be set and the NT31/NT31C will
return to the “MAINTENANCE MODE MENU” screen.
S
To quit the memory switch setting screen without confirming the settings, press
the “Abort” touch switch. The NT31/NT31C will return to the “MAINTENANCE
MODE MENU” screen with the previous settings still in effect.
6-9-11 Setting the Automatic Reset Function
The NT31/NT31C has a function for ignoring communication errors and automati-
cally returning to the RUN mode when they occur.
The “Comm. Auto-return” setting determines whether the automatic reset function
is effective or not.
S
ON:
When a communication error occurs, the NT31/NT31C automatically returns to
the RUN mode without displaying an error screen (the “System Initializing”
screen may be displayed).
S
OFF:
When a communication error occurs, an error screen is displayed and operation
stops. Pressing “OK” on the error screen returns the NT31/NT31C to the RUN
mode.
The default (factory) setting is “OFF”.