Omron MicroHAWK, Integration Manual

Page: 341 / 378

MicroHAWK Engine Integration Guide
14-21
Utilities
Reader Status Requests
<?> Status Byte
The reader responds to a status request <?> with a two character hex value, such as <?/22> .
To determine status:
1. Look up the binary conversion in the table below.
For example, the first hex 2 would be 0 0 1 0 in binary, as read from binary digits 3
through 0 ; the second hex 2 is also 0 0 1 0 as read from binary digits 7 through 4 .
2. Next, enter your binary values from the table below in the
“Binary” column next to the appropriate bit.
3. Under “Binary,” interpret 1 s as true and 0 s as not true. For
example, bit 1 has a 1 in the “Binary” column, indicating
“Command Received”. Bit 5 is also a 1 , indicating that the
“Reader is in a read cycle”.
<K?> All Status Request
This is the fastest way to learn the reader’s current configuration. Sending this request will
return the current settings of all commands, starting with the lowest K command value and
ending with the highest K command value.
<K??> All Descriptor Status Request
This request will return all current descriptors for every K command, starting with the lowest
K command value and ending with the highest K command value.
<K?#> All Range Status Request
This request will return the current settings of all commands within the user-defined range,
starting with the lowest user-defined K command value and ending with the highest
user-defined K command value.
Bit Binary Reader Status
0 0 Command error detected
1 1 Command received
2 0 Communication error detected
3 0 Flash sector unprotect failure
4 0 Host port buffer overflow
5 1 Reader is in a read cycle
Hex
Value
Binary
Bit Digits
7 6 5 4
3 2 1 0
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1