Omron MicroHAWK, Integration Manual

Page: 20 / 378

1-10
MicroHAWK Engine Integration Guide
Configure Read Cycle Settings
Start / Stop
This mode uses External Level with a Read Cycle Timeout and Continuous Capture ,
allowing you to set Leading Edge and Trailing Edge as well as the Serial Trigger and
the Start and Stop characters.
Serial Trigger (Non-Delimited) Off
When Serial Trigger is set to Off , the start and stop characters are set to NULL , meaning
that the trigger is disabled.
Serial Trigger (Non-Delimited) On
When Serial Trigger is set to On , the start and stop characters are set to S and E . When
the trigger button is clicked, it will use the current start and stop non-delimited triggers.
Custom
This mode allows you a wider variety of read cycle scenarios, including Continuous Read
Auto . Use this mode to select Trigger mode and to set Serial Trigger Character and
Trigger Delay ; to select Capture mode and to set Number of Captures , Rapid Capture
mode, and Delay between Images ; and to select the End Cycle On setting as well as
Timeout and Number of Symbols .