Omron MicroHAWK, Integration Manual

Page: 267 / 378

MicroHAWK Engine Integration Guide
10-13
Matchcode
New Master Pin
New Master Load Status
Definition: If Matchcode and New Master Pin are enabled and the new master pin
is momentarily activated (must be active for a minimum of 10 ms) master
symbol information will be loaded into the database based on the next
read cycle that achieves a Good Read, starting with Index 1 .
Serial Cmd: < K225, status >
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Definition: The new master status responds with the number of the next master
position to be loaded, where 0 represents “idle” or “no master to be
loaded.”
Example: If the user has the Number of Master Symbols set to 1 , and
then either sends a <G> or toggles an active New Master Pin , the state
will be 1 , and prior to reading and effectively loading position 1 , the
response to <NEWM> would be <NEWM/1> . Once a symbol has been
read and loaded, the status will be cleared: <NEWM/0> .
Serial Cmd: < NEWM >