Omron MicroHAWK, Integration Manual

Page: 73 / 378

MicroHAWK Engine Integration Guide
2-17
Using ESP
Defaulting
When you select Default Current Menu Settings or Default all ESP Settings , you are
only defaulting the ESP settings.
Advanced Options
Send Current View
This is the same as Save to Reader
> Send No Save except that only the
commands in the current configuration
tree are sent.
Send Current Command
This is the same as Send Current
View , except that it saves only the
command that is currently selected.
Add/Remove Exception
After you perform a Receive Reader Settings command
1
and you click on the Add Exception
option, you may see a list of serial commands. These are commands that may be in your
reader’s firmware, but not included in, or different from, your current version of ESP .
You can edit these commands by double-clicking on them and changing them as needed.
It is important to note that these commands will be saved to your reader whenever you
send a Save to Reader command, or an <A> or a <Z> command.
Also, if there is a corresponding ESP menu item, the ESP Value column for that item will
be blank following a Receive Reader Settings command.
1. From the Send/Recv button or by right-clicking in any blank section of a tree control view.