manualshive.com logo in svg

Omron HEM-9000AI, Instruction Manual

Share
Download
Omron HEM-9000AI Instruction Manual Download Page 91

91

21.Error List

EN

General Error Codes 

If the errors cannot be solved by the suggested actions, contact OMRON.

Message Dialog

Action

E10

Main unit malfunction.

Turn off main power supply switch.

Turn off the power. Turn the power back on. If the 
problem is not resolved, contact OMRON.

E19

End of Calendar.

Unable to continue.

Change the date and time settings in the 
settings menu after power has been 
restored to the system.

The calendar function cannot be used after 
December 31, 2030.

E13 
E20

Printer error.

Turn off main power supply switch.

Turn off the power. Turn the power back on. If the 
problem is not resolved, contact OMRON.

E21

No printer paper.

Load paper.

Open the printer cover and load paper. (Refer to 
Section 8.5.)

E22

Printer cover is open.

Close cover.

Close the printer cover.

E23

Printer jam.

Remove jammed paper.

Open the printer cover and remove the paper. (Refer 
to Section 8.5.)

E42

This memory card has not been formatted. 
Push the eject button, remove the memory 
card and insert a new memory card.

Obtain a new memory card and insert it into the 
memory card slot on the main unit.

E45

The measurement data has not been 
saved.

Retake the measurement.

E46

This system was not properly terminated.

The latest measurement data has not been 
saved.

Data was not saved since the power was 
disconnected or interrupted during measurement.

E47

There is no memory card inserted in the 
device.

Therefore the operation was terminated.

Memory card has not been inserted. Insert a 
memory card into the slot on the right side of the 
main unit.

E48

ID DATA has not been copied.

Try to copy the information again following the 
procedure on Section 18.10. starting from the step 
on copying ID information.

Replace clock battery.

Contact OMRON.

Insert memory card.

Memory card has not been inserted. Insert a 
memory card into the slot on the right side of the 
main unit.

This memory card cannot be used.

Format the memory card (Section 18.10.) or replace 
it with a different memory card.

When the memory card is not properly ejected, 
important DATA may be lost. Turn the power off and 
back on in order to insert a memory card.

Turn off the power. Reinsert the memory card and 
turn the power back on.

Memory capacity is insufficient.

Replace with empty memory card.

Eject the memory card and replace it with a new 
one. (Section 18.10.)

Current memory card cannot be used.

Turn off the power. Reinsert the memory card and 
turn the power back on.

This value is out of range.

The number just entered was not appropriate. 
Reenter the number.

Summary of Contents for HEM-9000AI

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands