35
12.AI + Blood Pressure Measurement
EN
Press the [
] buttons to display results from each
pulse wave measurement.
Example: If 35 waveforms are measured:
34/35
35/35
AVG
1/35
2/35
The pulse wave number is displayed below the
waveform (in the left centre part of the screen).
[Fig. 8]
cSBP is displayed only when AVG is selected to
display.
8.
Press the START button to continue measuring. At
this time, the message “Start measurement with the
same ID?” will be displayed. Select “Yes” or “No”.
Select the START button [Yes] to begin
measurement.
Select the STOP button [No] to erase the ID and
return to the default screen. Enter the ID for the next
patient.
Select the F1 key [CANCEL] to return to the
previous screen and change the measurement
mode. [Fig. 9]
[Fig. 8]
[Fig. 9]
Pulse wave number
When the waveform is deformed or inflation is judged to
be incorrect, an error message will appear on screen
(E04 - E08, E73 - E82). In this case, measure again.
Refer to Section 21.
An error message window appearing in the middle of the
screen can be closed by pressing any button.
Summary of Contents for HEM-9000AI
Page 94: ...94 22 Specifications ...
Page 95: ...95 22 Specifications EN ...
