Omron HEM-9000AI, Instruction Manual

Page: 31 / 96

31
12.AI + Blood Pressure Measurement
EN
12.AI + Blood Pressure Measurement
12.1. Measuring AI + Blood Pressure Together
This section explains how to simultaneously measure AI and blood pressure using both arms.
To measure AI and blood pressure alternately, follow the instructions in Section 18.3. to change the
AI measurement sequence.
1.
Apply the AI pulse wave sensor unit to the left wrist
and the cuff to the right arm. (Refer to Section 9.)
Make sure the patient’s name and ID are displayed
at the upper left corner of the screen. [Fig. 1]
2.
If nothing is displayed, follow the instructions in
Section 17. to register or retrieve the ID information.
If the ID information is not registered, only the date, time and
results will be saved.
Check that the BP and AI measurement methods in
the lower-left part of the screen are both displayed.
3.
Press the START button to start measurement.
[Fig. 2]
Inflation of the sensor unit will begin.
Inflation of the cuff will begin after AI pulse wave
sensor pressure becomes stable.
* If you wish to stop during measurement, press the STOP
button. Deflation will occur rapidly.
* When measurement takes more than 5 minutes, the device
will automatically stop.
* Pressing the DISPLAY button during measurement will stop
the measurement and turn off the screen.
4.
Make sure the tonogram in the top middle of the
screen rises and forms a triangle. [Fig. 3]
(The continuous pulse waves are displayed at the lower
left corner of the screen.)
[Fig. 1]
[Fig. 2]
[Fig. 3]
Tonogram
Do not press the START (Start measurement) button
without applying the AI pulse wave sensor unit. In
addition, do not press the START (Start measurement)
button without wrapping the blood pressure cuff. Do
not allow the AI pulse wave sensor unit to slip during
AI pulse wave measurement.