29
10.Post - Measurement
EN
10.Post - Measurement
10.1. How to Remove the AI Pulse Wave Sensor Unit
1.
Check that measurements are complete. [Fig. 27]
Push down the slide stoppers on both sides and
return the sensor to its original position. Put the AI
pulse wave sensor back in the storage clip.
2.
Remove the fastener from around the subject’s
wrist, and store. [Fig. 28]
Attach the protection cap back on the sensor when it
is stored.
[Fig. 28]
[Fig. 27]
Summary of Contents for HEM-9000AI
Page 94: ...94 22 Specifications ...
Page 95: ...95 22 Specifications EN ...
