Omron HEM-9000AI, Instruction Manual

Page: 37 / 96

37
13.Blood Pressure Measurement
EN
5.
The pulse wave level is displayed with a bar during
measurement. [Fig. 5]
6.
Once measurement is
complete the buzzer will
sound* and the results will
appear. [Fig. 6]
Deflation is automatic. Upon
completion, a “COMPLETE”
message will appear in the
lower-left part of the screen.
The buzzer will not sound* if it
is set to OFF in the settings
menu.
7.
Press the START button to continue measuring. At
this time, the message “Start measurement with the
same ID?” will be displayed. Select “Yes” or “No”.
Select the START button [Yes] to begin
measurement.
Select the STOP button [No] to erase the ID and
return to the default screen. Enter the ID for the next
patient.
Select the F1 key [CANCEL] to return to the
previous screen and change the measurement
mode. [Fig. 7]
[Fig. 5]
[Fig. 6]
Systolic blood
pressure value
Diastolic blood
pressure value
Pulse
Pulse pressure
[Fig. 7]
When the measurement or inflation are judged to be
incorrect, an error message (E04 – E08) will be
displayed.
In this case, measure again. Refer to Section 21.
An error message window appearing in the middle of
the screen can be closed by pressing any key.