Omron CP1E-E10DT-A, User Manual

Page: 29 / 280

24 CP1E CPU Unit Hardware User’s Manual(W479)
Regulations and Standards
• EMC Directives
• Low Voltage Directive
z
EMC Directives
OMRON devices are electrical components that are designed to be built into equipment and manu-
facturing systems. OMRON devices that comply with EMC Directives also conform to the related
EMC standards*, so that they can be more easily built into other devices or the overall machine.
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer.
EMC-related performance of the OMRON devices that comply with EC Directives will vary depend-
ing on the configuration, wiring, and other conditions of the equipment or control panel on which the
OMRON devices are installed. The customer must, therefore, perform the final check to confirm that
devices and the overall machine conform to EMC standards.
* The applicable EMC (Electromagnetic Compatibility) standard is EN61131-2.
z
Low Voltage Directive
Always ensure that devices operating at voltages of 50 to 1,000 VAC and 75 to 1,500 VDC meet the
required safety standards for the PLC (EN 61131-2).
z
Conformance to EC Directives
The CP1E PLCs comply with EC Directives. To ensure that the machine or device in which the
CP1E PLC is used complies with EC Directives, the PLC must be installed as follows:
• The CP-series PLC must be installed within a control panel.
• CP-series PLCs complying with EC Directives also conform to EN61131-2. Radiated emission
characteristics (10-m regulations) may vary depending on the configuration of the control panel
used, other devices connected to the control panel, wiring, and other conditions. You must there-
fore confirm that the overall machine or equipment complies with EC Directives.
• A SYSMAC CP-series PLC is a class A product (for an industrial environment). In residential
areas it may cause radio interference, in which case the user may be required to take adequate
measures to reduce interference.
SYSMAC is a registered trademark for Programmable Controllers made by OMRON Corporation.
CX-One is a registered trademark for Programming Software made by OMRON Corporation.
Windows is a registered trademark of Microsoft Corporation.
Other system names and product names in this document are the trademarks or registered trademarks
of their respective companies.
Conformance to EC Directives
Applicable Directives
Concepts
Trademarks