Omron CP1E-E10DT-A, User Manual

Page: 102 / 280

4-3
4 Programming Device
CP1E CPU Unit Hardware User’s Manual(W479)
4-1
Ap
p
licab
le P
ro
g
rammi
n
g
De
vi
ce
s f
o
r CP
1E
4
4-1-2
C
X
-P
rog
ramm
e
r
Precautions for Correct Use Precautions for Correct Use
• This section describes the unique applications and functions of the Micro PLC Edition CX-
Programmer version 9.03 or higher/CX-Programmer for CP1E. In the remainder of this sec-
tion, “CX-Programmer” refers to the Micro PLC Edition CX-Programmer version 9.03 or
higher/CX-Programmer for CP1E.
When using the full version of CX-Programmer provided in CX-One, refer to the CX-Program-
mer Operation Manual (Cat. No. W446).
• A Programming Console cannot be used for the CP1E. Use the CX-Programmer.
• The windows described in this section are the windows using the CX-Programmer for CP1E.
When using the CX-Programmer or the Micro PLC Edition CX-Programmer, the specification
may be different. Check the window specifications sufficiently.
Refer to the CX-Programmer Operation Manual (Cat. No. W446) for details.
z
Using Project Files Saved with the CX-Programmer (.CXP) on the CX-
Programmer for CP1E
The CX-Programmer for CP1E cannot open a .CXP project created on the CX-Programmer (CX-
One/CX-One Lite). Use programming from a project saved in a .CXP file on the CX-Programmer for
CP1E according to the following procedure.
1
Start the CX-Programmer (CX-One/CX-One Lite) and CX-Programmer for CP1E together.
2
Copy the rungs of the program to be used from the Ladder Programming Window of the CX-Pro-
grammer (CX-One/CX-One Lite), and paste them into the CX-Programmer for CP1E.
Additional Information
Files created with the CX-Programmer for CP1E (.CXE) can be opened with CX-Programmer
version 8.2 and higher.
The CX-Programmer is a basic software application for creating and debugging PLC programs.
4-1-2 CX-Programmer
CX-Programmer
CX-Programmer
Programming Tasks Ladder diagrams
Programming functions
Monitoring
Debugging and maintenance functions
PLC Setup
CPU Unit parameters