Omron 3G8F7-CRM21, User Manual

Page: 69 / 238

49
Implementing the Reset Request Section 4-5
4-5 Implementing the Reset Request
To use the Reset service of Identity Objects, a logic must be programmed so
that the CompoNet Master Board requests a reset and the user application
resets the Board. (The logic is not required if you do not use the Reset service
of Identity Objects.)
Precautions for Correct Use
A program must ensure that the Board is reset no earlier than 1 second after a
Board reset request is received.
Loop Start
(
Open Board
)
CPNT_Open
Final processing
Loop End
(Stop Communications cycles)
CPNT_StopCycle
(Close Board)
CPNT_Close
Initial processing
(
Register Board Reset Request
Message
)
CPNT_
RegRESETNotifyMessage
I/O process and so on
( Reset Board)
CPNT_Reset
(
Start Communications cycles
)
CPNT_
StartCycle
Wait for 1 second
Notify the Board reset
request