Omron 3G8F7-CRM21, User Manual

Page: 100 / 238

80
Communications Control API Section A-3
CPNT_SOFTWARE_TABLE structure
CPNT_EX_TABLE structure
9 Logical error
checking item flag 0 (OFF): Disabled
1 (ON): Enabled
This is used to set the items to be checked when a
Slave Unit re-participates after a communications
error.
When it is enabled, set the necessary data to the
structure CPNT_EX_TABLE. When it is disabled, all
items are checked.
10 Network parameter
function flag 0 (OFF): Disabled
1 (ON): Enabled
This is the network setting for CompoNet Master
Board. When it is enabled, set the necessary data to
the structure CPNT_EX_TABLE.
11 Slave Unit parameter
function flag 0 (OFF): Disabled
1 (ON): Enabled
This is used to set the notification to a Slave Unit,
when it participates. When it is enabled, set the
necessary data to the structure CPNT_EX_TABLE.
12 to
15
Reserved area Always set 0 (OFF).
Type Parameter Description
WORD OutNode Specify the maximum number of occupied Word
OUT Slave Units.
Settable range: 0 to 64
WORD InNode Specify the maximum number of occupied Word IN
Slave Units.
Settable range: 0 to 64
WORD BitOutNode Specify the maximum number of occupied Bit OUT
Slave Units.
Settable range: 0 to 128
WORD BitInNode Specify the maximum number of occupied Bit IN
Slave Units.
Settable range: 0 to 128
Type Parameter Description
CPNT_REGIS
T_TABLE RegTable Set it when the Registration table function is
enabled.
WORD LogicalCheck Set it when the Logical error checking item flag is
enabled.
CPNT_NET_P
ARAM NetParam Set it when the Network parameter function flag is
enabled.
CPNT_SLAVE
_PARAM SlaveParam Set it when the Slave Unit parameter function flag is
enabled.
Bit Flag Description