Omron 3G8F7-CRM21, User Manual

Page: 65 / 238

45
Detailed Setting at Communications Cycle Startup Section 4-2
4-2 Detailed Setting at Communications Cycle Startup
This is the procedure by which to use the detailed setting functions such as
the Registration table, and to start the communications. Use the function
CPNT_StartCycleEx and notify the CompoNet Master Board of the detailed
settings.
Loop Start
YES
NO
(Open Board)
CPNT_Open
(Read Basic status group)
CPNT_GetStatus
An error on the basic
status group?
Error solving
(Write OUT data)
CPNT_SetOutData
CPNT_SetBitOutData
(Read IN data)
CPNT_GetInData
CPNT_GetBitInData
Data Inputs and
Outputs
End processing
Loop End
(Stop Communications cycles)
CPNT_StopCycle
(Close Board)
CPNT_Close
Initial processing
(Start Communications cycles
in details setting)
CPNT_StartCycleEx