91
Advanced Settings (Connection, Communication Cycle Time, Slave Function Settings, Etc.)
Section 4-9
4-9
Advanced Settings (Connection, Communication Cycle
Time, Slave Function Settings, Etc.)
The following description provides information on the connection, device infor-
mation display and check, communication cycle time, message timer, and
slave function settings.
4-9-1
Advanced Settings
Select
Device
,
Parameter
,
Edit
, and the
General
Tab. Select the slave and
click the
Advanced Setup
Button.
Make advanced setup settings (such as device information display/compare
and connections settings) for remote I/O communications.
Note
These settings are supported for the CS1W-DRM21 and CJ1W-DRM21 only.
Device Information
Display/Compare
Settings
Device Information
Tab
The following settings make it possible to display or compare device informa-
tion on slaves.
Use the following procedure.
1,2,3...
1.
Select the slave from the Registered Device List.
2.
Click the
Advanced Setup
Button.
3.
The following window will be displayed.
Click the
Device Information
Tab.
The device information (consisting of vendor, device type, and product
code data) on the selected slave is displayed.
By checking the above boxes, the device information will be compared with
the corresponding data in the scan list when I/O communication connec-
tions are established.
If these boxes are checked, the device
information will be compared with the
corresponding data in the scan list
during remote I/O communication. If
the information does not coincide with
the data, a verify error will result.
The device information on the
selected slave will be displayed.
Summary of Contents for 3G8E2-DRM21-EV1
