![background image](http://html1.mh-extra.com/html/omron/3g8e2-drm21-ev1/3g8e2-drm21-ev1_operation-manual_742061163.webp)
144
Error Messages
Appendix A
“Specified ID already used.”
The specified node address has already been used by another device. Set
another node address.
“Specified MAC ID already used with other
device.”
The specified node address has already been used by another device. Set
another node address.
“Specified interface already opened.”
The specified interface has already been opened by another application.
Quit the application and set the interface again.
“Newly Plugin module is not able to be
configured because is currently being used.”
The specified Expansion Module cannot be refreshed because the device
presently displayed is in use. Restart the Configurator and set the
Expansion Module again.
“Can not register to own device.”
The master device cannot be registered with itself.
“Receive thread can not be created.”
The internal reception thread could not be created.
“No usable interface.”
A usable interface has not been set. Register the interface.
“Usable printer has not been set.”
A usable printer has not been set. Register the printer.
“Status can not be got.”
The interface status could not be obtained.
“Already set.”
The specified data has already been set.
“Already register.”
The specified device has already been registered.
“Slave’s total channel size over.”
The size per slave is in excess of the maximum IN/OUT size that can be
registered in the scan list. Set the IN/OUT size correctly.
“Slave’s total channel size over.”
The number of words per slave is in excess of the maximum number of per-
missible words that can be registered with the scan list. Set the number of
words within the permissible range.
“Out of setup memory block.”
The number of bytes occupied from the start word is in excess of the mem-
ory block. Set the number of bytes occupied within the permissible range.
“Wrong Setup file.”
The setup file is incorrect. Set the correct file.
“Setup file can not be copied.”
The setup file could not be copied. Check the empty space of the disk and
copy the file again.
“Setup possible parameters not exist.”
The specified device has no parameters that can be set.
“Out of Setup Range.”
The specified area is in excess of the possible setting range. Set the
number of occupied words within the permissible range.
“Invalid parameter.”
The set value is incorrect. Set the correct value.
“Wrong Occupied Bytes.”
The number of allocated bytes is incorrect. Set the size correctly.
“Wrong Channel Counts.”
The number of specified words is incorrect. Set the number of words within
the permissible range.
“Register Slave to be tested not exist.”
No slaves to be tested exist. Set the slaves correctly.
“Specified Device ID being used by
Configurator.”
The node address coincides with that of the Configurator. Set a different
node address.
“Device not selected.”
The target device has not been selected. Select the target device.
“Specified device can not be accessed, or
wrong device type.”
Either the specified device does not exist or the device in the Configurator
is a different type to the actual network device. Check and set the device
again.
“Device can not be accessed.”
The specified device could not be accessed. Check and set the device
again.
“Invalid device type.”
The device in the Configurator does not coincide with the actual network
device. Check and set the device.
“Default I/O not specified.”
The default connections have not been specified. Set the default
connections.
“Found registered device which is not yet
assigned to allocate to memory.”
I/O allocations to all registered devices have not been completed. Complete
I/O allocations.
“Out of register possible I/O size.”
The I/O size is in excess of the permissible I/O size that can be registered.
Set the I/O size correctly.
“I/O data size mismatch detected in the reg-
istered device. I/O size in the Scan list will
be used.”
The I/O size of the actual slave is different from the I/O size registered in
the parameters.
Set the correct I/O size for the slave.
If no EDS file is installed (in which case the I/O size will be zero), install the
EDS file.
Error message
Meaning
Summary of Contents for 3G8E2-DRM21-EV1
