![background image](http://html1.mh-extra.com/html/omron/3g8e2-drm21-ev1/3g8e2-drm21-ev1_operation-manual_742061164.webp)
145
Error Messages
Appendix A
“Filename not specified.”
The file name has not been specified. Set the file name.
“Save folder not specified.”
The save folder has not been specified. Set the folder.
“Invalid EDS File.”
The EDS file is not valid. Set the correct EDS file.
“Not enough memory.”
The command cannot be executed because of insufficient memory. Quit the
other application and execute the command again.
“Unit mode can not be changed.”
The mode could not be changed. Check the device and execute again.
“Valid I/O Comment not exist.”
The specified command cannot be executed because no valid I/O comment
exists.
“Failed to find valid I/O data.”
Valid I/O data does not exist. Set the I/O size correctly.
“No valid connection exists, or exceeding the
number of connections permitted.”
No valid connection exists or the specified number of connections is
excessive. Set the connections correctly or limit the number of connections
to two.
“No valid data.”
There is no valid data. Check the parameters.
“Valid Device not exist.”
There is no valid data in the scan list. Register the device.
“Valid Slave not exist.”
There is no valid slave.
“Wrong Valid Bits.”
There is no valid bit. Set the correct bit.
“Wrong Unit Configuration.”
The Configurator and network device are different to each other in unit
configuration. Check and amend the difference.
“Wrong Unit Type.”
The type of the master specified in the file is wrong. Specify the correct file.
“Specified Parameter read only.”
The data is read-only. Check the parameter.
“Receiving response failed.”
The response could not be received. Try again.
“No valid memory area for allocation found.”
The memory block has no possible allocation area. Check the size of the
memory block.
“Out of allocate possible maximum number
of words.”
The number of words is in excess of the possible number of words that can
be allocated to the master. Set the number of words within the possible
range.
“Wrong Allocated Words.”
The number of words is incorrect. Set the number of words within the
possible range.
“Bit–Strobe has no valid I/O data.”
There is no valid I/O data for bit-strobe connections. Set the size correctly.
“Wrong Bit–Strobe’s IN data size.”
The bit-strobe connection I/O size is incorrect. Set the size within eight
bytes.
“Wrong Bit–Strobe Connection I/O Size.”
The bit-strobe connection I/O size is incorrect. Set the size within eight
bytes.
“Bus Off occurred.”
A bus-off error occurred in the network. Make an online connection again.
“COS has no valid I/O data.”
There is no valid I/O data for COS connections. Set the size correctly.
“COS and Cyclic can not be set
simultaneously.”
Both COS and cyclic connections cannot be set together.
“Cyclic has no valid I/O data.”
There is no valid I/O data for cyclic connections. Set the size correctly.
“Wrong I/O Size.”
The I/O size is incorrect. Set the I/O size correctly.
“This device does not have I/O data.”
The device cannot be registered with the scan list because the device has
no data.
“Input IN/OUT Size in even–numbered
bytes.”
The number of IN/OUT bytes is not an even number. Set an even number.
“Wrong PLC Type.”
The mounted PLC is wrong. Set the correct PLC.
“Mismatch detected between POLL OUT
data and COS/Cyclic OUT data.”
The poll and COC/cyclic connections are different to each other in OUT
size. Set the same OUT size.
“Poll has no valid I/O data.”
There is no valid I/O data for poll connections. Set the size correctly.
“Set in HEX format string.”
Input a hexadecimal string.
Error message
Meaning
Summary of Contents for 3G8E2-DRM21-EV1
