138
Importing Files Created in Version 1 of the Configurator
Section 6-6
3.
If valid I/O comments exist, a window will be displayed to specify the name
of the folder where the I/O comment data is to be exported and the name
of the file.
4.
Input the folder and file names and click the
Save
Button.
The I/O comment data will be exported.
The following types of I/O comment data will be exported according to the
device selected.
Note Part of I/O comment data exported in the CSV format can be opened
in spreadsheet software and used for CX-Programmer variable ta-
bles.
6-5-3
Exporting Device Parameters
Device - Export -
(Export
type)
Device parameters of OMRON’s CVM1-DRM21-V1, C200HW-DRM21-V1,
and CS1W-DRM21 can be exported in the DRM_UNIT file format for open
network controllers or the NX-Server file format for the DeviceNet.
Use the following procedure to export the device parameters of the Master
1, 2, 3...
1.
Select the device.
2.
Select
Export
.
3.
Select the export type.
The following three export types are supported.
If valid devices are registered with the scan list, a window will be displayed
to specify the name of the folder, where the device parameters are export-
ed, and the name of the file.
4.
Enter the folder and file names and click the
Save
Button
The device parameters will be exported.
To use the exported file, refer to the operation manual on the software or
hardware of the device.
6-6
Importing Files Created in Version 1 of the Configurator
This section explains the import function to read network configuration files
and device parameter files created in version 1 of the Configurator
(Ver. 1.
@@
).
6-6-1
Importing Network Configuration Files
Network - Import
To read the network configuration file (.ntf) created in version 1.
@@
of the
Configurator, use the following procedure.
Device
I/O comment data
Master device
Master I/O comment data, if it exists, or the I/O comment data of the devices registered in the
scan list. If the registered slaves support a number of connections, the I/O comment data on
the connection used by the master will be exported.
Slave devices
Slave I/O comment data.
If a slave supports a number of connections, the I/O comment data on all devices including
those not registered with the master will be exported.
Export type
Description
NX-Server DDE file
Scan list information is output in the NX-Server DDE
Edition file format.
NX-Server ONC file
Scan list information is output in the NX-Server ONC
Edition file format.
ONC Master file
Scan list information is output in the ONC Master
parameter file format.
Summary of Contents for 3G8E2-DRM21-EV1
