108
Downloading the Network Configuration/Device Parameters to Devices
Section 5-2
Refer to the
SYSMAC CS/CJ-series Operation Manual
for each setting
item.
SYSMAC CS/CJ Ethernet
Unit IF Port
(Continued from step 1 above.)
2.
If
SYSMAC CS/CJ Ethernet Unit IF Port
is specified as the interface, the
Setup Interface Dialog Box will be displayed.
Refer to
Selecting SYSMAC CS/CJ Ethernet Unit IF
in
3-3-2 Designating
the Interface
for each setting item.
3.
Click the
OK
Button.
A confirmation window will be displayed. Click the
OK
Button.
The DeviceNet network will be connected.
When the network is connected normally online, the color of the status in-
dicator on the Status Bar will change to blue and
Online
will be displayed.
5-1-3
Going Offline
Network - Disconnect
Use the following procedure to set the Configurator to offline.
Select
Network
and
Disconnect
.
The DeviceNet network will be disconnected.
5-2
Downloading the Network Configuration/Device
Parameters to Devices
This section explains how to write the master and slave parameters that were
created on the Configurator to the actual network devices. This process is
called “downloading.”
The following two methods are used to write parameters to network devices.
• Downloading the network configuration
• Downloading parameters for specific devices
Summary of Contents for 3G8E2-DRM21-EV1
