117
Monitoring Devices
Section 5-4
5.
The following confirmation window will be displayed.
6.
Click the
Yes
Button.
The progress window will be displayed and the comparison results will be
displayed.
5-4
Monitoring Devices
The following description explains how to use monitor the device or communi-
cations.
Note
The device to be monitored through the Network Configuration Window must
exist on the actual network. Before monitoring the status of the monitor,
upload the network configuration.
5-4-1
Setting Monitor Refresh Timer
Option - Setup Monitor Refresh Timer
Set the interval to refresh the device monitor display. This setting will be
applied to the monitoring of any network device.
Note If the refresh timer is set to too small a value, the DeviceNet network
will be overloaded and the Configurator may experience timeout er-
ror (device access error).
To set the monitor refresh timer, use the following procedure.
1, 2, 3...
1.
Select
Option
and
Setup Monitor Refresh Timer
.
The following window will be displayed.
2.
Select the new timer value and click the
OK
Button.
The set value will be enabled for the next device monitor operation.
5-4-2
Monitoring Devices
Device - Monitor
To monitor the device, use the following procedure.
1, 2, 3...
1.
Place the Configurator online.
2.
Select the device.
3.
Select
Device
and
Monitor
.
Summary of Contents for 3G8E2-DRM21-EV1
