3 - 17
3 Network Startup
CompoNet Communications Unit User’s Manual (I582-E1)
3-2
Network C
onf
igu
ra
tion
3
3-
2-4
Allocation Using
CX-Integr
ator (
C
ommunication
Mode 8)
1
At first, set the rotary switch on the front of the CompoNet Master Unit (CS/CJ-series) to 8
and power on the Master Unit.
2
Connect CX-Integrator to the CS/CJ-series and click the Auto Online icon [
] in the
CX-Integrator toolbar to establish Auto Online connection.
When connected successfully, CX-Integrator displays the online status and the target PLC infor-
mation in the [Online Connection Information window].
3
In the Online Connection Information window, right-click the CompoNet Communications
Unit under the target PLC and select [Connect].
4
When connected to the Master Unit, the Transfer dialog box is displayed, prompting you
to select the data you want to transfer.
Select the target data and click the [Transfer] button. Here, select [Network structure only].
Precautions for Correct Use
Precautions for Correct Use
The [Network structure and Parameters for each component] option requires a parameter
transfer time of approximately 15 seconds per node.
This means that it may take as much as approximately 100 minutes for the transfer process to
complete.
5
In the Network Configuration window, the network configuration transferred to the PC is
displayed.
3-2-4
Allocation Using CX-Integrator (Communication Mode 8)
Summary of Contents for 3G3AX-MX2-CRT-E
