![background image](http://html1.mh-extra.com/html/omron/3g3ax-mx2-crt-e/3g3ax-mx2-crt-e_user-manual_740779049.webp)
2 - 7
2 CompoNet Communications Unit Mounting and Wiring
CompoNet Communications Unit User’s Manual (I582-E1)
2-2 In
stal
latio
n
2
2-
2-1 Mo
untin
g Procedure o
f CompoNet
Co
mmunications Unit on MX2-
ser
ies Inverter
• If the CompoNet Communications Unit is used in the following locations, provide sufficient shielding
measures. Using the CompoNet Communications Unit in any of these locations may result in equip-
ment damage.
Locations subject to static electricity or other forms of noise
Locations subject to strong electromagnetic fields
Locations close to power lines
• During installation, wiring, and network setting on the CompoNet Communications Unit, please refer
to applicable sections of this manual to ensure the correct connection and configuration procedures.
• When removing the CompoNet Communications Unit, do not pull the flat cable.
• When mounting the CompoNet Communications Unit, be sure that the flat cable is not pinched.
• When mounting the CompoNet Communications Unit, be careful about burrs of the break-outs on the
inverter.
1
Loosen the screw of the option cover.
Remove the cover.
2
For inverters up to 4.0 kW: Loosen the screws of
the terminal block cover.
This is for the ground terminal wiring.
2-2-1
Mounting Procedure of CompoNet Communications Unit on
MX2-series Inverter
Summary of Contents for 3G3AX-MX2-CRT-E
