10-004209-01EN [Q7750159], Rev. 2, May 2018
Chapter 3
78
3.4.3.3
Two Axis Scan Screen
Figure 3
‑
26 The Two Axis Scan screen
The
Two Axis Scan
screen initiates and monitors the two axis scan (see Figure 3-26 on
page 78). The screen displays a visual representation of the scan area. The small circle
(2) indicates the A position. The square (3) indicates the scan area described by the B
and C positions.
The blinking cross hair (2) indicates the current scanner position.
The current position of the scan (4) and index (5) axis are displayed.
When a right drive module is detected with an auxiliary encoder, the auxiliary
encoder position (6) is displayed.
Start/Stop
button (7)
Starts or stops the scan sequence. When a scan has been stopped while in
progress, the
Start
button resumes the scan.
Reset
button (8)
Returns the scanner to the A position. Press the
Start
button to begin the scan
sequence from the initial setting.
Summary of Contents for SteerROVER
